Admiralty Brass Tubes

image 1

Admiralty Brass Tubes

One Piece Extruded Tubes, ABS Tubes, Two Piece Formed Tubes. Admiralty Brass tubes has good corrosion resistance and is specially used for tubing of steam condensers cooled with fresh, brackish or salt water. Admiralty brass, which constitutes of 30% zinc and 1% tin & inhibits dezincification in most environments. The most common and wrought form is tube for heat exchange equipment. These tubes are extensively used in various applications including ship-building, water heaters, evaporators, heaters, turbine oil coolers for petrochemical, desalinations plants, condensate coolers, vent condensers, generator, air coolers, power plants etc.

Specification

Standard BS 2871 PART3 ASTM B 111 DIN 1785 NFA 51 102 JIS H3300 IS 1545
Symbol CZ 111 C 44300 CuZn28Sn1 CuZn29Sn1 C 4430 CuZn29Sn1As
Cu 70.0-73.0 70.0-73.0 70.0-72.5 70.0-73.0 70.0-73.0 70.0-73.0
Sn 1.0-1.5 0.9-1.2 0.9-1.3 0.9-1.2 0.9-1.2 1.0-1.5
Pb 0.07 0.07 0.07 0.07 0.07 0.07
Ni - - 0.1 - - -
Fe 0.06 0.06 0.07 0.06 0.06 0.06
Zn REM'DER REM'DER REM'DER REM'DER REM'DER REM'DER
As 0.02-0.06 0.02-0.06 0.02-0.035 0.02-0.06 0.02-0.06 0.02-0.06
P - - 0.01 - - -
Total Impurities Max. -
0.03 - 0.1 0.3 - 0.3
Condition M 61 F36 - - O
TA - F32 - O TA
O - - - - D
Yield Strength N/MM2 - - 140-220 - - -
- 105 100-170 - - -
Tensile N/MM2 Minimum - 310 360 - - 375 Mpa Max.
- - 320 - 314Min. 340 Mpa Min.
- - - - - 385 Mpa Min.
Elng'Tion Percent (%) Minimum - - 45Min. - -. -
- - 55Min. - 30 Min. -
Hardness HV5 - 150Min - - - - 80 Max.
85-105 - - 80-120 - 80-105
75Max. - - - - 130 Min.
Grain Size mm (75X) 0.05Max. 0.010-0.045 - 0.010-0.045 0.010-0.045 0.010-0.04